Roadware 10 Minute Concrete Mender™
Roadware 10 Minute Concrete Mender, the advanced concrete repair material that is easy to apply and stays in place.
Now you can repair cracks and spalls to a smooth finish in a fraction of the time it takes with ordinary products. Roadware 10 Minute Concrete Mender is a revolutionary new two-part hybrid urethane for repairing concrete. It's nearly water thin for deep penetration and it won't pop out like epoxy because it never gets brittle.
No pot-mixing and no waste.
Roadware 10 Minute Concrete Mender is packaged in uniquely designed ratio-packs that completely mix the material at the point of application. No pot-mixing and no unused material. Difficult repairs are now simple, just clean the area, prime with 10 Minute Concrete Mender, add manufactured sand, and flood with additional 10 Minute Concrete Mender. In 10 minutes you'll get a tough 4500 psi polymer concrete that will stay in place permanently.
Great for all industrial floors.
Roadware 10 Minute Concrete Mender is extremely tough and will withstand even the harshest punishment. Great for freezers... may be applied at temperatures as low as -20° F with excellent results. High chemical resistance, perfect for containment areas. Re-coat in 10 minutes, will accept primers and industrial coatings in just 10 minutes after application. Now prep-work and coatings can be applied in the same day!
Roadware 10 Minute Concrete Mender™ is a two-part polyurethane that penetrates deep into concrete to make permanent repairs. At only 8.6 cps, Concrete Mender actually injects itself into the matrix of the concrete and shores up the existing concrete as well as making the repair. Concrete Mender eliminates the bond line and Microdowles into the concrete.
Roadware uses Microdoweling technology to achieve incredible bond with concrete surfaces. More:
What makes Roadware 10 Minute Concrete Mender different from other concrete repair products?
"Roadware needle tip crack injection costs less to install and is more effective than pressure applied epoxy injection methods." according to top concrete repair contractors. "We can get in, permanently repair the cracks, and get out in the same time it use to take just to install the old injection ports."
"The key is the surface tension," says Kelton Glewwe, Marketing Vice President. "With a surface tension one third of water, Concrete Mender can slip deep down into the concrete surfaces and dowel itself into millions of micro fractures in the cracked concrete. We call the process Microdoweling™ and it only exists in Concrete Mender™ You can actually see it with an electron microscope. We have the full report on the Roadware website." Top experts in the concrete industry agree and recommend Roadware 10 Minute Concrete Mender™ for repairs in places like Wal-Mart, Home Depot, Lowes, Menards, Target, Honda, Boeing, Costco, Best Buy, and many more. "Wherever people have to depend on their floor, the experts in the industry depend on Roadware 10 Minute Concrete Mender™."
One gallon of Concrete Mender™ goes a long way:
One gallon of Concrete Mender™ will make 2.2 gallons of repair material when typically applied with 2 parts sand. That makes Concrete Mender™ a better value then most epoxies and polyureas.
Is it really just like Concrete Mender™? Been burned by a repair the failed in days or weeks? Click here to see how genuine Concrete Mender™ stacks up against look-a-like products.
Click on a link below for detailed information:
Roadware 10 Minute Concrete Mender™ won the
Click below to see a movie of Concrete Mender in action.